Setting The System And Boards - Sony PWS-4400 Operation Manual

Setting the System and
Boards
You set the system frequency and board settings for the
unit using the web menu. The settings are specified using
a setup wizard.
1
Display the [System] screen of the web menu, and
click the [Board] tab.
2
Click the [Setting] button.
The [Step 1] screen appears.
3
Select the system frequency, and click the [Next]
button.
Select 23.98, 24, 25, or 29.97 Hz.
The [Step 2] screen appears.
4
Select the input/output grouping of each port, and click
the [Next] button.
The [Step 3] screen appears.
5
Select the video codec of each port, and click the
[Next] button.
The [Step 4] screen appears.
6
Select the video signal format of each port, and click
the [Next] button.
For each port, select the video signal format group
from the matrix.
The [Step 5] screen appears.
7
Select the sync operation grouping of each port, and
click the [Next] button.
The [Step 6] screen appears, displaying the selections
made on the [Step 1] to [Step 5] screens.
8
Check the selected items, and click the [Submit]
button. A confirmation message appears. Click [OK].
The unit restarts automatically and the settings are
enabled.
To set each port individually, see "Port Screen" (page 27)
of the web menu.
Note
Changing the system frequency or other board settings will
disable the loop recording area settings. Reconfigure the
settings on the [Loop] tab on the [Storage] screen of the
web menu, as required.

Setting the System and Boards

13