Akai MPC5000 Reference Manual page 21

34
34. [AFTER] Buttons (12):
When these buttons are engaged during recording, the Q-LINK slider or knob associated with the selected [AFTER]
button will overwrite any existing slider data on your track. Additionally, these buttons can be configured to send MIDI
Continuous Controller information to control external MIDI devices. See 'Program and FX Q-LINK Controllers' on page
179 for more about this.
35. Q-LINK Knobs (8):
These knobs let you manipulate your sounds in real-time. The knobs can be assigned to control various parameters in
SLIDER mode, or to send MIDI continuous controller data to external modules.
Controllers' on page 179 for more about this.
36. Q-LINK Sliders (4):
These sliders let you manipulate your sounds in real-time. The sliders can be assigned to control various parameters in
SLIDER mode, or to send MIDI continuous controller data to external modules.
Controllers' on page 179 for more about this.
37
37. [ERASE] Button:
Use the [ERASE] button to delete events within a track. You can use this button in real-time during recording, or to
delete events using the ERASE window. For more information see page 25.
38. [NOTE REPEAT] Button:
Holding this button down when you strike a pad causes the pad to retrigger the sample at a rate indicated in the 'Timing
Correct' Window ([F1] (T.C.) on the MAIN page). Note Repeat allows for the playing of drum rolls, hi hat runs with
36
38
35
See 'Program and FX Q-LINK
See 'Program and FX Q-LINK
7