The Effect Set selected in the 'From' field will be copied to the effect set selected in the 'To' field. Pressing the [F4] (CANCEL) button cancels the

operation and closes the window.

Resetting the effect set

You can reset the setting for the Effect Set to the default settings.

01.

Select the 'Effect Set' field at the top of the BUS1-2 or BUS3-4

page.

02.

Press the [WINDOW] button.

The EFFECT SET window will be displayed.

03.

In the EFFECT SET window, press the [F2] (RESET) button.

The RESET EFFECT SETTINGS window will be displayed.

04.

In the 'Effect' field, select the effect set you wish to reset.

05.

Press [F5] (DO IT).

The settings of the effect set selected in the 'Effect' field will be reset to the default settings. Pressing the [F4] (CANCEL) button cancels the

operation and closes the window

Copy / Paste / Swap Effect Settings

You have the ability to Copy / Paste and Swap Effect Types and settings. This will allow you to copy and paste effects

across buses, and move effects to different slots easily.

[F2] COPY

This button copies the effect type, and all the effect settings into memory

to be PASTED or SWAPPED.

[F3] PASTE

This button will replace the currently selected effect with the effect that

was copied into memory.

[F5] SWAP

This button will exchange the current effect with the effect in memory.

Pressing SWAP again will toggle between the previous effect and the current effect.

Easy Effect List Navigation

You can easily navigate to the beginning or the end of the effect list popup by holding the [SHIFT] button and pressing

the [UP] or [DOWN] arrows, and pressing a letter using the [NUMERIC] keypad will jump to the first item alphabetically

corresponding to that letter.

Table of Contents

Copying The Effect Set; Resetting The Effect Set; Copy / Paste / Swap Effect Settings; [F2] Copy - Akai MPC5000 Reference Manual