JVC GR-DVP7 Instructions Manual page 40

40
EN
Wipe or Fader works when video recording is started
or stopped.
1
Set the VIDEO/MEMORY Switch to "VIDEO".
2
Set the Power Switch to "M" while pressing down
the Lock Button located on the switch.
3
Open the LCD monitor fully, or pull out the
viewfinder fully.
4
Set "v WIPE/FADER" to the desired mode.
( pg. 38)
● The selected effect indicator appears.
WIPE/FADER
Indicator
—
Downloaded From VideoCamera-Manual.com Manuals
Parameter
OFF Disables effects.
FADER–WHITE Fade in or out with a white screen.
FADER–BLACK Fade in or out with a black screen.
Fade in to a color screen from a black and white screen, or fade
FADER–B.W
out from color to black and white.
Wipe in on a black screen from the upper right to the lower left
WIPE – CORNER corner, or wipe out from lower left to upper right, leaving a black
screen.
The scene starts in the center of a black screen and wipes in
toward the corners, or comes in from the corners, gradually wiping
WIPE – WINDOW
out to the center.
Wipe in from right to left, or wipe out from left to right.
WIPE – SLIDE
Wipe in as the two halves of a black screen open to the left and
right, revealing the scene, or wipe out and the black screen
WIPE – DOOR
reappears from left and right to cover the scene.
The scene wipes in from the bottom to the top of a black screen, or
WIPE – SCROLL
wipes out from top to bottom, leaving a black screen.
Wipe in from the center of a black screen toward the top and
WIPE–SHUTTER bottom, or wipe out from the top and bottom toward the center
leaving a black screen.
RECORDING MENUS (cont.)
5
Press the Recording Start/Stop Button to start or
stop recording. The selected Fade-in/out or
Wipe-in/out effect works.
To deactivate the selected effect...
Select "OFF" in step 4.
NOTES:
● You can select other effects for "v WIPE/FADER"
during recording.
● You can extend the length of a Wipe or Fader by
pressing and holding the Recording Start/Stop
Button.
Description
( : Factory-preset)