Tripod Mounting; Lcd Monitor And Viewfinder; Brightness Adjustment Of The Display; C •+, - Button - JVC GR-DVP7 Instructions Manual

Tripod Mounting

Align the screw on the tripod with the camcorder's
mounting socket. Then tighten the screw.
● Some tripods are not equipped with studs.
CAUTION:
When attaching the camcorder to a tripod, extend
its legs to stabilize the camcorder. It is not advised
to use small sized tripods. This may cause damage
to the unit by falling over.
Downloaded From VideoCamera-Manual.com Manuals

LCD Monitor And Viewfinder

While using the LCD monitor:
Make sure the viewfinder is pushed back in. Open
the LCD monitor fully. It can rotate 270º (90º
downward, 180º upward).
While using the viewfinder:
Make sure the LCD monitor is closed and locked.
Pull out the viewfinder fully.
● Be sure to pull out the viewfinder until you hear a
click, otherwise it may be pushed back in during
use.
90˚
180˚
Brightness Adjustment Of The
Display
Press MONITOR BRIGHT + or – until the bright
level indicator on the display moves and the
appropriate brightness is reached.
● It is also possible to adjust the brightness of the
viewfinder.
BR I GHT
13
EN
MONITOR
BRIGHT +/–
Button