Samsung NX5837750SS User Manual page 78

Troubleshooting
Others
The product is not The appliance has been
installed improperly.
The leveling leg(s) is (are)
damaged or uneven.
The kitchen cabinets are not
properly aligned and make
the range appear to be not
level.
Display goes
Food does not
bake or roast
properly in the
The electrical outlet Ground
Fault Interrupter (GFI or
GFCI) has been tripped and
needs to be reset.
Your digital control has
been damaged.
The wrong cooking mode is
selected.
Make sure the floor is level, strong,
and stable. If the floor sags or slopes,
contact a carpenter.
Check and level the range. (See the
Installation Instructions.)
The oven racks have not
been positioned properly
for the foods being cooked.
Incorrect cookware or
cookware of improper size
is being used.
The oven thermostat needs
adjustment.
There is aluminum foil on
racks and/or oven bottom.
The clock or timers are not
set correctly.
Ensure that cabinets are square and
provide sufficient room for installation.
Replace fuse or reset circuit breaker.
See 30.
See 39.
See 22.
See 59.
Remove foil.
See 20 and :21.
78 English
NXSgI7750SS Dg6g 00623A 00 ENindd 78