Table of Contents
Advertisement
Available languages
Available languages
Gas range
Ignition
Make sure all surface burners are properly
installed. To light a burner:
1,
Push in the control knob, and then turn
it to the LITE position. You will hear a
"clicking" sound indicating
the electronic
ignition
system is working
properly.
2,
After the surface burner lights, turn
the control knob to shift it out of the
LITE position and turn off the electronic
ignition
system.
3,
Turn the control knob to adjust the flame
level.
Manual ignition
If there is a power failure, you can ignite the burner manually.
Use caution when doing this.
1,
Hold a long gas grill lighter to the surface burner you want to light.
2,
Push in the control knob for that burner, and then turn it to the LITE position. Turn on the
grill lighter to ignite the burner.
3,
After the burner is lit, turn the control knob to adjust the flame level.
Flame level
The flames on the burners should always stay under the cookware, and should not extend
beyond the cookware bottom at any time.
A
WARNING
Flames larger than the cookware bottom
may result in a fire or physical injury.
26
English
NXSg]7750SS
DG6g
00623A
00 ENindd
26
Advertisement
Table of Contents
