Checking Battery Electrolyte Level - Mitsubishi 2010 RVR Owner's Manual

Table of Contents

Advertisement

Vehicle care and maintenance
NOTE
After replacing the battery, the electronic control system
data for the automatic transaxle, etc., will be erased.
As a result, shifting may be rough.
Shifting will become smoother after several changes in
speed.

Checking battery electrolyte level

The electrolyte level must be between the limits shown on the
outside of the battery. Fill it with distilled water as needed. The
7
inside of the battery is divided into several compartments. Take
the cap off of each compartment and fill to the mark.
Do not fill above the top line because a spill during driving
could cause damage.
7-18
Removing and installing the upper cover and
duct
To replenish with the distilled water, remove the upper cover
and duct.
WARNING
!
Turn the ignition switch to the "LOCK" position or
put the operation mode in OFF.
Make sure that your clothes cannot be caught by the
fan or drive belt. Personal injury could result.
N00901300038

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2010 outlander sport

Table of Contents