Manual Transaxle (If So Equipped) - Mitsubishi 2010 RVR Owner's Manual

Table of Contents

Advertisement

Manual transaxle
The shift pattern below is shown on the gearshift lever. Press
the clutch pedal all the way down while shifting gears.
NOTE
During cold weather, shifting may be difficult until the
transaxle lubricant has warmed up. This is normal and not
harmful to the transaxle.
To start
Press the clutch pedal all the way down and shift into 1st. Then
gradually release the clutch pedal while depressing the acceler-
ator pedal.
(if so equipped)
N00512700100
CAUTION
!
Do not rest your foot on the clutch pedal because
this will cause premature clutch wear or damage.
Do not coast in the "N" (Neutral) position (illegal in
many states).
Do not use the gearshift lever as a handrest, because
this can result in premature wear of the transaxle
shift forks.
NOTE
If it is hard to shift into 1st, depress the clutch pedal a sec-
ond time; the shift will then be easier.
Proper shift points
Always use care to change the gear with the vehicle speed
matched to the engine speed. Proper shifting will improve fuel
economy and prolong engine life.
CAUTION
!
Avoid downshifting that may cause the tachometer
pointer to enter the red zone.
This puts the engine at risk of being damaged.
Features and controls
3
N00537400052
3-71

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2010 outlander sport

Table of Contents