Headlight Flasher; Dimmer (High/Low Beam Change) - Mitsubishi 2010 RVR Owner's Manual

Dimmer (high/low beam change)

To change the headlights from high beam to low beam and vice
versa, pull the turn signal lever to (1). Switch the headlights to
low beam as a courtesy whenever there are oncoming vehicles,
or when there is traffic moving ahead of you. An illuminated
blue light in the instrument cluster indicates when the head-
lights are on high beam.

Headlight flasher

N00549900142
You can flash the high beams by pulling the lever gently
toward you (2). The lights will go back to normal when you let
go. While the high beam is on, you will see a blue light on the
instrument panel.
NOTE
You can flash the high beams by pulling the lever toward
you, even if the light switch is off.
If you turn the lights off with the head lights set to high-
beam illumination, the headlights are automatically
returned to their low-beam setting when the light switch is
next turned to the "
Features and controls
N00550000185
" position.
3
3-187