Metrologic MS6130 Installation And User Manual page 35

A A (C
PPENDIX ONTINUED
Specifications of Battery Pack
Battery Type:
Configuration:
Nominal Voltage:
Maximum Voltage:
Capacity:
Charge Cycles:
Charge Time:
Short Circuit Protection:
Temperature Characteristics (Degrees Celsius) of each Cell:
Charge: 0 to +45
Discharge: -20 to +60
Storage (Long): -30 to +35
UK Compliance
To charge the batteries in the MS6130 - 418MHz, remove the ESD cover
from the bottom of the unit. Refer to the battery charge rate for additional
information. After a full charge, replace the cover over the battery contacts.
The cover should remain in place during operation
)
"AA" NiCd Rechargeable
3 Batteries/Pack
3.6 VDC
4.8 VDC
600 mA
Over 500 Full Charge/Discharge
4 Hours
Auto/Reset Fuse 1.7A Hold Current
31