Settings Page - Denon DN-200WS User Manual

WPS Mode
To set up DN-200WS in WPS Mode:
1. Make sure DN-200WS is in STA Mode (as described earlier in
2. Press the Mode Button once. The AP Mode Light and STA Mode Light will flash.
3. On your wireless router, press its WPS, QSS, or Reset button. (Your router must
support WPS. Please see your router's documentation for more information.)
4. Wait for 5–10 seconds. DN-200WS will automatically enter WPS Mode, and the
STA Mode Light will turn on.
To exit WPS Mode, do one of the following:
•
Disconnect DN-200WS from its power outlet, and then reconnect it.
•
Press the Reset button on DN-200WS.

Settings Page

To enter DN-200WS's settings:
1. Connect your wireless device to DN-200WS.
2. On your wireless device, open your web browser and go to http://192.168.0.1.
The Settings page will appear and show several fields, described below.
Device Information:
•
AP SSID (for AP Mode): Use this field to set the SSID (service set identifier). If
this field is empty, the default SSID will have DN-200WS in the name followed
by a unique code for your particular unit. If you rename the SSID, the unit's code
will be appended to the new name.
•
AP Password (for AP Mode): Use this field to set the password. The default
password is pr215denn. If this field is empty, there will be no password.
10
STA Mode).