Denon DN-200WS User Manual page 8

AP Mode
To set up DN-200WS in AP Mode:
1. If the AP Mode Light is off, press and hold the Mode Button for 3
seconds.
2. On your wireless device, enter the page or control panel used to select
a wireless network.
3. From the list of wireless networks, select DN-200WS. By default, this
is the one with DN-200WS in the name followed by a unique code for
your particular unit.
If you already entered a new network name in the AP SSID field in the
Settings page, select that name instead. The unit's code appended to
the new name.
4. Enter the password for the wireless network. The default is pr215denn.
If you already entered a new password in the AP Password field in the
Settings page, enter that password instead.
If you left the AP Password field empty, no password is required.
Your wireless device is now connected to DN-200WS. Play audio on
your wireless device to send it from DN-200WS's outputs to your
loudspeakers or mixer.
Note: To learn how to enter the settings for each mode (SSID,
password, etc.), see the following
8
Settings Page section.