Intel G03-NF9W-F Technical Manual page 39

The default setting is: [1].
*This item may or may not show up, depending on different configuration.
 PC Health Status
Press [Enter] to view current hardware health status, set shutdown temperature, or
make further settings in 'Smart Fan Configuration'.
 SmartFAN Configuration
Press [Enter] to make settings for SmartFAN Configuration:
CPUFAN / SYSFAN1/ SYSFAN 2 Smart Mode
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:
CPUFAN / SYSFAN1/ SYSFAN 2 Full-Speed Temperature
Use this item to set CPUFAN/SYSFAN1/ SYSFAN2 full speed temperature. Fan
will run at full speed when above this temperature.
CPUFAN / SYSFAN1/ SYSFAN 2 Full-Speed Duty
Use this item to set CPUFAN/SYSFAN1/ SYSFAN2 full speed duty. Fan will run at
full speed when above the pre-set duty.
CPUFAN / SYSFAN1/ SYSFAN 2 Idle-Speed Temperature
Use this item to set CPUFAN/SYSFAN1/ SYSFAN2 idle speed temperature. Fan
will run at idle speed when below this temperature.
CPUFAN / SYSFAN1/ SYSFAN 2 Idle-Speed Duty
Use this item to set CPUFAN/SYSFAN1/ SYSFAN2 idle speed duty.. Fan will run
at idle speed when below the pre-set duty.
Shutdown Temperature Configuration
Use this item to select system shutdown temperature.
The optional settings are: [Disabled]; [70
o o
[85 C/180 F];[90
 CPU Configuration
Press [Enter] to view current CPU configuration and make settings for the following
sub-items:
o o
C/188 F].
o o
C/156 F]; [75
34
o o o
C/164 F]; [80 C/172
o
F];