Intel G03-NF9W-F Technical Manual page 36

ERP Support
The optional settings: [Enabled]; [Disabled].
This item should be set as [Disabled] if you wish to have all active wake-up
functions.
Case Open Detect
This item controls detect case open function.
The optional settings are: [Enabled]; [Disabled].
WatchDog Timer
Use this item to enable or disable WatchDog Timer Control. When set as
[Enabled], the following sub-items shall appear:
WatchDog Timer Value
User can set a value in the range of [10] to [255].
WatchDog Timer Unit
The optional settings are: [Sec.]; [Min.].
WatchDog Wake-up Timer
This item support WDT wake-up while ERP function is set as [Enabled].
The optional settings are: [Enabled]; [Disabled].
When set as [Enabled], the following sub-items shall appear:
WatchDog Timer Value
The setting range is [10] ~ [4095] seconds, or [1]~[4095] minutes.
WatchDog Timer Unit
The optional settings are: [Sec.]; [Min.].
ATX Power Emulate AT Power
This item displays current Emulate AT Power Status, motherboard power On/Off
control by power supply. User needs to select 'AT or ATX Mode' on MB jumper at
first (refer to Page 9, Jumper AT_MODE for ATX Mode & AT Mode Select).
 Serial Port Console Redirection
Press [Enter] to make settings for the following sub-items:
COM1/COM2
31