Kenwood KMM-BT515HD Instruction Manual page 38

Wiring connection
(for
IMPORTANT : We recommend installing the unit with a commercially available custom wiring harness specific for your car
and leave this job to professionals for your safety. Consult your car audio dealer.
(For )
To the remote control, KCA-RC55MR
(optional accessory)
Microphone input jack ( 16)
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Ignition switch
Car fuse box
Car fuse box
Black (Ground wire)
To the metallic body or chassis of the car
Battery
34
/ /
Fuse (10 A)
White
White/Black
Brown
Gray
(Mute control wire)
Gray/Black
Light blue/yellow
Green
(Steering remote control wire)
Green/Black
Blue/White
Purple
(Power control wire/
Purple/Black
Antenna control wire)
Red (Ignition wire)
Light blue/yellow
(Marine remote control wire)
Yellow (Battery wire)
Blue/White
(Power control wire)
Blue
(Antenna control wire)
)
Rear/ front/ subwoofer output
Antenna terminal
(For /
Expansion port (12 V 500 mA)
To the optional SiriusXM Vehicle Tuner (commercially available) ( 13)
If no connections are made, do not let the wire come out from the tab.
/ :
:
When connecting to an external amplifier, connect its ground
wire to the car's chassis to avoid damaging the unit.
)
To connect the Kenwood navigation system, refer your
navigation manual
To the steering wheel remote control adapter
To the power control terminal when using the optional power
amplifier or to the antenna control terminal in the vehicle
To Kenwood Wired Marine Remote Control unit (optional
accessory)
For the latest information on marine accessories please go to:
http://www.kenwoodusa.com/Car_Entertainment/Marine/
To the power control terminal when using the optional
power amplifier
To the antenna control terminal in the vehicle