Other Parameters - HP ProCurve 520wl User Manual

Command Line Interface (CLI)

Other Parameters

IAPP Parameters
Name
IAPP
IAPP Status
Periodic Announce
Interval (seconds)
Announce Response
Time
Handover Time-out
Max. Handover
Retransmissions
Send Announce
Request on Startup
NOTE �
These parameters configure the Inter Access Point Protocol (IAPP) for roaming. Leave these settings at their
default value unless a technical representative asks you to change them.
SpectraLink VoIP Parameters (802.11b Only)
Name
Spectralink VoIP
Spectralink VoIP Status
Type Values
Group N/A
Integer enable (default)
disable
Integer 80
120 (default)
160
200
Integer 2 seconds
Integer 410 ms
512 ms (default)
614 ms
717 ms
819 ms
Integer 1 - 4 (default 4)
Integer enable (default)
disable
Type Values
Group N/A
Integer enable
disable (default)
Access CLI Parameter
R iapp
RW iappstatus
RW iappannint
R iappannresp
RW iapphandtout
RW iapphandretx
RW iappannreqstart
Access CLI Parameter
R spectralink
RW speclinkstatus
C-45