Cli Command Types; Operational Cli Commands - HP ProCurve 520wl User Manual

Hide thumbs Also See for ProCurve 520wl:
Table of Contents

Advertisement

Command Line Interface (CLI)

CLI Command Types

This guide divides CLI Commands into two categories: Operational and Parameter Controls.

Operational CLI Commands

These commands affect Access Point behavior, such as downloading, rebooting, and so on. After entering commands
(and parameters, if any) press the Enter key to execute the Command Line.
Operational commands include:
?: Typing a question mark lists CLI Commands or parameters, depending on usage (you do not need to type Enter
after typing this command)
done, exit, quit: Terminates the CLI session
download: Uses TFTP server to download "image", "config", or "bootloader upgrade" files to Access Point
help: Displays general CLI help information or command help information, such as command usage and syntax
history: Remembers commands to help avoid re-entering complex statements
passwd: Sets the Access Point's CLI password
reboot: Reboots the Access Point in the specified time
search: Lists the parameters in a specified Table
upload: Uses TFTP server to upload "config" files from Access Point to TFTP default directory or specified path
? (List Commands)
This command can be used in a number of ways to display available commands and parameters.
The following table lists each operation and provides a basic example. Following the table are detailed examples and
display results for each operation.
Operation
Display the Command List (Example 1)
Display commands that start with specified letters (Example 2)
Display parameters for set and show commands (Examples 3a and 3b)
Prompt to enter successive parameters for Commands (Example 4)
Example 1. Display Command list
To display the Command List, enter ?.
[Device-Name]>?
Figure C-3
Result of "?" CLI command
Example 2. Display specific Commands
To show all commands that start with specified letters, enter one or more letters, then ? with no space between letters
and ?.
[Device-Name]>s?
Basic Example
[Device-Name]>?
[Device-Name]>s?
[Device-Name]>set ?
[Device-Name]>show ipa?
[Device-Name]>download ?
C-4

Advertisement

Table of Contents
loading

Table of Contents