Connecting Other Equipment; System Connections - Bose wave soundtouch Owner's Manual

Connecting Other Equipment

System connections

The connector panel of the Wave
1 FM 75Ω ANTENNA
3.5 mm FM antenna connector. See "Using an external antenna" on page 22.
2 Bose link
Input connector for the SoundTouch
3 AUx IN
3.5 mm stereo input connector for external sources. See "Using the AUX IN connector" on page 21.
4 HEAdPHONES
A 3.5 mm stereo headphone connector. See "Using headphones" on page 21.
5 Control button
Disables the Wi-Fi capability (page 26), initiates the alternate setup method (page 26), or restarts the SoundTouch
®
tal (page 26).
6 Wi-Fi indicator:
• Blinking white – Connecting to Wi-Fi network
• Solid white (dim) – System off and connected to Wi-Fi network
• Solid white (bright) – System on and connected to Wi-Fi network
• Blinking amber – Disconnected from Wi-Fi network
• Solid amber – System is in setup mode
• Off – Wi-Fi networking disabled or system is connected to Ethernet
7 Ethernet connector
Used for a wired network connection.
8 SETUP A
A USB Micro-B connector used for connecting to a computer for performing system setup.
9 SETUP B
A USB Standard A connector reserved for future use.
10 SERVICE
Used for special service functions. Not for customer use.
11 SoundTouch pedestal Bose link cable
™
Plugs into the Wave
®
20 - English
SoundTouch music system provides connections for external equipment.
® ™
7
6
5
pedestal.
™
music system Bose link connector. It provides power and control signals to the SoundTouch
2
1
10
9
8
4
3
11
pedes-
™
pedestal.
™