Neckstrap Attachment; Tripod Socket; Waterproof/Fogproof - Bushnell NatureView Instruction Manual

NECKSTRAP ATTACHMENT

Thread the ends of the neckstrap through the strap lugs on each side of the binocular, then back through
the plastic buckle. Adjust the position of the binoculars on your chest as they hang around your neck to
your preference by changing the length of the strap portion which passes through the lug and buckle (by
an equal amount on each side).

TRIPOD SOCKET

All full size (40 or 42mm) NatureView binoculars are tripod adaptable. To attach one
of these models to a tripod or monopod, unscrew (counter-clockwise) the "B" logo
cap which covers the threaded socket inside the center hinge, and set it aside in a
safe place (the "B" cap is not removable on the smaller 30 and 32mm models). Use
a compatible binocular tripod adapter, such as the Bushnell model #161002CM,
(an accessory bracket, shown here, which attaches between the binocular and
Binocular Tripod
tripod) to attach your NatureView to any standard tripod in a horizontal position to
Adapter (optional)
provide a stable image during prolonged viewing.
(Bushnell #161002CM)
WATERPROOF / FOGPROOF
Your Bushnell NatureView binocular has been designed and built utilizing the latest waterproof and fogproof
technology*. The binoculars are O-ring sealed for complete moisture protection. Fogproof protection is
achieved from dry nitrogen purging that removes all internal moisture.
*all roof prism models and 6x30 porro prism model only
8