Audio Steering Wheel Controls - Chevrolet AVALANCHE 2008 Getting To Know Manual

Getting to Know Your Avalanche
14
Rear Seat Entertainment (DVD)
The Rear Seat Entertainment (RSE)
system has all the functions of the RSA
system, with the added features of a
CD/DVD player as part of the front
radio, flip-down video screen, wireless
headphones and a remote control.
To play a DVD:
1. Turn the ignition to the Accessory or
Run position.
2. Push the release button on the DVD
display console and pull down the
video screen.
3. Insert a DVD into the DVD slot in the
radio. It will turn on the video screen
and begin playing automatically. It
may be necessary to press the Play
button on the RSE system or the
remote control to start playing the
movie if the DVD stops at a menu
screen.
Note: Aim the remote control at the
video screen, not the DVD player,
for proper operation.
4. To listen to the DVD through the vehi-
cle speakers, press the DVD/CD AUX
button. Adjust volume using the radio
volume control.
To listen to the DVD through the
headphones, select channel 1 and
push the power button on the head-
phones. Adjust volume using the
headphone volume control.
5. To control DVD playback, use the
remote control or the buttons under
the labels on the front radio display.
6. To turn off the RSE system, press the
power button for two seconds on the
front radio, eject the DVD or press
the power button on the remote
control.
See Section 3 of your Owner Manual.

Audio Steering Wheel Controls

A number of
audio controls
can be adjusted
at the steering
wheel.
+ – (Volume):
Pull up on the
+ or – button
to increase or
decrease the
volume.
(Next/Previous): Press the up or
down arrow to go to the next or previous
radio station stored as a favorite or,
when a CD is playing, to the next or
previous track.
SRCE (Source): Press this button
to switch between AM, FM, XM
(if equipped), CD and AUX.
(Seek): Press this button to go to the
next radio station.
(Mute/Voice Recognition): Press
this button to silence the system. Press
the button again to turn on the sound.
Press and hold the button for one sec-
ond to interact with the OnStar system.
See Section 3 of your Owner Manual.