Use of field specification checking mode
Data
1. If you want to use the field specification checking mode for your wired remote controller, press the Set and [∧]
buttons at the same time for more than 3 seconds.
2. Refer to the list of field specification for your wired remote controller on the next page, and select the desired menu.
f Using the [∧]/[∨] buttons, select a main menu number and press the [>] button to enter the sub-menu checking
f
screen.
f Using the [∧]/[∨] buttons, select a sub-menu number and press the [>] button to enter data checking screen.
f
f When you enter the checking stage, the current setting value will be displayed.
f
f Press the [<] button to move previous setting value.
f
f While configuring the sub manu setting, press the ESC button to exit to normal menu.
f
• While configuring the checking, press the ESC button to exit to the sub-menu setting screen.
• When you don't enter any buttons for more than 3 minutes, you will be back to normal mode.
NOTE
EHS_MONO- KIT_IB_05402A-00_EN.indd 35
Main menu
Sub-menu
ENGLISH-35
2015-03-16 오전 11:51:52