Power Management Mode - Canon WUX500 User Manual

HDMI image input
Set the type of equipment which is connected to the HDMI port. Note that to some extent, the
[HDMI image input] setting determines which image modes are available. (P61)
Option
Auto
Computer
HDBaseT image input
Specify the type of equipment connected to the HDBaseT port. Note that to some extent, the
[HDBaseT image input] setting determines which image modes are available. (P61)
Option
Auto
Computer

Power management mode

> [System settings] >
You can specify to turn off the lamp or projector automatically after a certain period
if the projector and remote control are not used and there is no input signal.
Submenu
Disabled
Lamp off
Standby
• After the lamp is turned off, projection resumes when the same input signal is restored,
or when the remote control or projector is operated.
• After the projector enters standby, restoring projection requires the same steps as when
turning the projector on normally.
• When [Disabled] is selected, [Direct power on] (P98) is not available.
Select when AV equipment will be connected. Image processing, menu
displays, and other elements are adjusted for video equipment.
Select when a computer will be connected. Image processing, menu
displays, and other elements are adjusted for a computer.
Select when AV equipment will be connected. Image processing, menu
displays, and other elements are adjusted for video equipment.
Select when a computer will be connected. Image processing, menu
displays, and other elements are adjusted for a computer.
[Power management mode]
Disable power management mode.
Only turns the lamp off.
Turns the projector off and puts it in standby.
Function
Function
Function
97
Menu Description