Using Menus; Menu Configuration - Canon WUX500 User Manual

Using Menus

Use the menus to set the operation of the projector in detail.

Menu Configuration

The menu screen is divided into 6 tabs as shown below.
[Input settings] tab (P69)
You can set the type of signal or the method of
projection of the images input.
[Image adjustment] tab (P76)
You can adjust the image quality and colors
according to your preference.
This setting is used when installing the projector.
Contents of menu
[Install settings] tab (P83)
[System settings] tab (P92)
You can set the operation of the projector.
[Network settings] tab (P110)
These settings are for when using the projector
from a PC via a network.
For the network settings, refer to "Network
settings" (P105).
You can check information about the
signal types of the images projected and
other information.
66
[Information] tab (P140)
Menu items