SE oils and quality oil filters. Oil
change intervals longer than those
listed above will seriously reduce
engine life and may affect Chevro-
let's obligation under the provisions
of the New Vehicle Warranty.
A high quality SE oil was in-
stalled in your engine at the factory.
It is not necessary to change this
facory-installed oil prior to the rec-
ommended normal change period.
However,
check
the oil level more
NOTE: Non-detergent and other
low quality oils are specifically not
recommended. Only the use of SE
engine oils and proper oil and filter
change intervals assure you of con-
tinued proper lubrication of your
Chevrolet engine.
frequently during the break-in pe-
riod since higher oil consumption
is normal until the piston rings be-
come seated.
Recommended Viscosity
Select the proper viscosity from the following chart:
RECOMMENDED SAE VISCOSITY NUMBER
I
,.
. . . .
~.-."').
... .II • • • : . ;
I
-30
-20
0
20
40
60
80
100
TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE,
OF.
NOTE: SAE 5W-30 viscosity oil is recommended for all seasons in
vehicles normally operated in Canada. SAE 5W-20 oils are not recom-
mended for sustained high-speed driving.
SAE 30 oils may be used at temperatures above 40
o
P.
The proper oil viscosity helps
assure good cold and hot starting.
NOTE: The oil gauge rod is also
marked, "Use SE Engine Oil" as
a reminder to use only SE oils.
52
Checking Oil Level
The engine oil should be main-
tained at proper level. The best
time to check it is before operating
the engine or as the last step in
a fuel stop. This will allow the
oil accumulation in the engine to