Image Adjustment - Mitsubishi Electric PK10 User Manual

Image adjustment

Image adjustment
You can adjust the image using the IMAGE menu.
To control the white-to-black level of the image:
Adjust CONTRAST in the IMAGE menu. Press the
to increase the contrast and the
To control the light level of the image:
Adjust BRIGHTNESS in the IMAGE menu. Press the
button to lighten the image and the
To determine the intensity of the color:
Adjust COLOR in the IMAGE menu. Press the
increase the amount of color in the image and the
to decrease it.
To adjust the red-green color balance of the image:
Adjust TINT in the IMAGE menu. Press the
increase the amount of green in the image and the
button to increase the amount of red in the image.
To adjust the detail and clarity of the image:
Adjust SHARPNESS in the IMAGE menu. Press the
button to sharpen the image and the
the image.
EN-26
Downloaded From projector-manual.com Mitsubishi Manuals
button
button to reduce it.
button to darken it.
button to
button
button to
button to soften
Adjustment of the image from the
computer
This projector adjusts the format of the video signal
supplied from the computer. However, sometimes images
are not projected correctly owing to the type of the
computer used. When the image from the computer isn't
projected correctly, press the AUTO button. If the image
isn't projected correctly yet, adjust the image from the
computer using the menu.
To move the image horizontally:
Adjust HORIZ. POSITION in the SIGNAL menu. Press
the button to move the image to the left. Press the
button to move the image to the right.
To move the image vertically:
Adjust VERT. POSITION in the SIGNAL menu. Press the
button to move the image upward. Press the
to move the image downward.
When the image flickers:
Adjust FINE SYNC. in the SIGNAL menu.
button