Yamaha Motif XF6 Owner's Manual page 15

7 8
9 FOOT SWITCH jacks
For connection of an optional FC3/FC4/FC5 Footswitch to the
SUSTAIN jack and a FC4/FC5 Footswitch to the
ASSIGNABLE jack. When connected to the SUSTAIN jack,
the Footswitch controls sustain. When connected to
ASSIGNABLE, it can control one of various different
assignable functions. The function assignment can be set in
the Voice Edit mode.
For more information, refer to "Voice mode" in the Reference
Manual.
) FOOT CONTROLLER jacks
For connection of optional foot controllers (FC7 and FC9).
Each jack lets you continuously control one of various
different assignable functions—such as volume, tone, pitch,
or other aspects of the sound. The function assignment can
be set in the Voice Edit mode.
For more information, refer to "Voice mode" in the Reference
Manual.
! ASSIGNABLE OUT L and R jacks
Line level audio signals are output from this instrument via
these phone jacks (1/4" mono phone plug). These outputs
are independent of the main output (at the L/MONO and R
jacks below), and can be freely assigned to any of the Drum
Voice keys or the Parts. This lets you route specific Voices or
sounds for processing with a favorite outboard effect unit.
The Parts which can be assigned to these jacks are as
follows:
• Audio Part in the Voice mode
• Drum Voice key to which the drum/percussion instrument is
assigned
• Any Part of a Performance*
• Any Part of a Song*
• Any Part of a Pattern*
*Including the Audio Input Part
The Part assignment above can be set via the Output Select parameter.
For details, refer to the Reference Manual.
@ OUTPUT L/MONO and R jacks
Line level audio signals are output via these phone jacks. For
monophonic output, use only the L/MONO jack.
9 ) !
# PHONES (Headphone) jack (page 16)
This standard stereo phones jack is for connection to a set of
stereo headphones.
$ A/D INPUT jacks (page 47)
External audio signals can be input via these phone jacks
(1/4" mono phone plug). Various devices such as
microphone, guitar, bass, CD player, synthesizer can be
connected to these jacks and their audio input signal can be
sounded as the Audio Part of the Voice, Performance, Song,
or Pattern. In the Sampling mode (page 47), these jacks are
used for capturing audio data as samples. In addition, you
can use the special Vocoder feature by connecting a
microphone to this L jack and inputting your Voice to the
microphone.
Use 1/4" mono phone plugs. For stereo signals (such as from
audio equipment), use both jacks. For mono signals (such
as from a microphone or guitar), use only the L jack.
% GAIN knob (page 50)
For adjusting the input gain of the audio at the A/D INPUT
jacks (above). Depending on the connected device
(microphone, CD player, etc.), you may need to adjust this
for optimum level.
Controls and Functions
@ #
MOTIF XF Owner's Manual
$ %
15