Advertisement
STACKED ISO MOUNT UNITS PROVISION
*
Note: Refer also to the instructions included with the aftermarket radio.
1
Cut and remove the bar in the factory
radio trim panel. (Figure A)
TIP: The smoother the cut, the better
the 95-7326 will look in the dash panel.
2
Snap the Double DIN brackets to the
inside edge of the Double DIN trim
plate. (Figure B)
3
Slide the stacked ISO units into the
bracket/trim plate assembly and
secure the units to the assembly using
the screws supplied with the units.
(Figure C)
Continue to final assembly.
95-7326 KIT ASSEMBLY
3
A
CUT OUT BAR
CUT HERE
B
C
Advertisement
