Table of Contents
Advertisement
LC-60/70LE740E/RU,741E/S,743E,60LE840E/RU,841E/S,843E,80LE645E/RU,646E/S,648E
2. Entering and exiting the adjustment process mode
1) Unplug the AC power cord of running TV set to force off the power.
2) While holding down the "VOL (-)" and "INPUT" keys on the set at once, plug in the AC power to turn on the power.
The letter "K" appears on the screen. This state is in Inspection mode.
3) Next, hold down the "VOL (-)" and "CH (
Multiple lines of blue characters appearing on the screen indicate that the set is now in the adjustment Process mode.
If you fail to enter the adjustment process mode (the display is the same as normal startup), retry the procedure.
4) To exit the adjustment process mode after the adjustment is done, unplug the AC power cord to force off the power.
(When the power is turned off with the remote controller, once unplug the AC power cord and plug it in again. In this case, wait for 20 seconds or
so after unplugging.)
CAUTION: Use due care in handling the information described here lest the users should know how to enter the adjustment process mode.
If the settings are tampered with in this mode, unrecoverable system damage may result.
3. Remote controller key operation and description of display in adjustment process mode.
1. key operation
Remote controller key
CH keys (
/
)
CH (
VOL keys (+/-)
VOL (+/-)
—
Cursor (
/
)
—
Cursor (
/
)
INPUT
INPUT
OK
—
RETURN
—
Input mode is switched automatically when relevant adjustment is started so far as the necessary input signal is available.
4. Description of display
(1) Present page / number of total pages
1/20
MAIN Version
BOOT Version
Monitor Version
T-CON Version/LED CON Version
NET TV KEY/MAC
CI+INFO/SECURE BOOT
MARLIN
WMDRM
FRC Version
LAMP ERROR
MONITOR ERR CAUSE
NORMAL STANDBY CAUSE
ERROR STANDBY CAUSE
No.
Description
(1)
Present page/number of total pages
(2)
Input that has been selected now
(3)
Present colour system
(4)
Inducing display
(5)
Inch setting and Model name display
(6)
Item name
(7)
Parameter
)" keys on the set at once.
Main unit key
Moving an item (line) by one (UP/DOWN)
/
)
Changing a selected item setting (+1/-1)
Turning a page (PREVIOUS / NEXT)
Changing a selected line setting (+10/-10)
Input source switching (toggle switching) (TV→EXT1→ etc...)
Executing a function
Returning to a present page
(3) Present colour system
(2) Input that has been selected now
INPUT1
(6) Item name
2char/2char Decimal Number mark.
TUNER/DTV/INPUT1/INPUT2/INPUT3/INPUT5/INPUT6/INPUT7/etc. ⋅⋅⋅
AUTO/N358/N443/PAL/SECAM/480i/580i/1080i/50 etc. ⋅⋅⋅
EUROPE/RUSSIA/SWEDEN
Inch setting and Model name display
Max. 30 char
Max. 60 char
Remote controller key Main unit key Function
(4) Inducing display
(5) Inch setting and Model name display
AUTO
EURO
1.00 (E 2011/**/** )
xxxxxxx
xxxxxxx
xxxxxxxx/xxxx
xxxxxxx
xxxxx/YES
xxxxxxx
xxxxxxx
xxxxxxx
0
1)xxxxxx 2)xxxxxx
3)xxxxxx 4)xxxxxx
0
0 0 0 0
(7) Parameter
Display specification
5 – 45
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
