Start Mode; Input Fixed; Speaker On/Off Selection; Remote Control Path Through - Sharp LC-60LE740E Service Manual

LC-60/70LE740E/RU,741E/S,743E,60LE840E/RU,841E/S,843E,80LE645E/RU,646E/S,648E
11) Start mode [INPUT MODE START]
Option "NORMAL" or "Input source 1 (input selection or channel)" ... (loop enabled)
Default "NORMAL"
Function Which kinds of input source or channel is decided when the power turning on.
NORMAL
Remarks • When setting to not Normal, ON TIMER (Watching reservation) has priority.
• When setting to "NORMAL", [INPUT MODE FIXED] is set to "VARIABLE" and [INPUT MODE FIXED] is prohibited to
select. (selection impossible.)
Example of option: "NORMAL", "TVD (002TV)", "INPUT1", "INPUT2", "INPUT3", "HDMI1", "HDMI2", "HDMI3", "HDMI4".
12) Input fixed [INPUT MODE FIXED]
Option "VARIABLE", "FIXED", "ACCTRL" or "AC/RCCTRL" (loop enabled)
Default VARIABLE
Function VARIABLE
FIXED
AC CTRL
AC/RC CTRL
Disabled key when CHANNEL (+/-), DIRECT CHANNEL buttons, FLASHBACK, INPUT SELECT, TV/VIDEO, AUTO PRESET,
setting to "FIXED" MANUAL MEMORY, i.LINK, DIRECTINPUTSELECT, ATV, DTV, EPG, RADIO etc...
Remarks • If [INPUT MODE START] is Normal, this function cannot be set.
Set to "VARIABLE" automatically.
• When setting to "FIXED",
The item related to the channel setting and input selection in Menu are not displayed.
ON TIMER (Watching reservation) is not active.
* These items does not exist according to the model.
13) Speaker ON/OFF selection [LOUD SPEAKER]
Option "ON" or "OFF" (loop enabled)
Default ON
Function ON
OFF
Remarks • When the VOL (+/-) key is pressed, the mute icon is displayed for 4 seconds.
• For the MUTE key and sound-related keys, caution is displayed.
• For the headphones, normal operation is possible.
14) Remote control path through [RC PATH THROUGH]
Option "OFF", "ON: TVRCE" or "ON: TVRCD" (loop enabled)
Default OFF
Function The item decide whether the signal received by the remote control's light-receiving section is output to the blankpin (9pin)
of RS232C.
OFF
ON: TVRCE
ON: TVRCD
Exception • In the case of "ON: TV RCD", the start operation in the adjustment process mode, inspection mod are enabled
• In the case of "ON: TV RCD", all the keys are enabled regardless of this setting while entering the adjustment process
Remarks * Remote control path through does not exist according to the model.
15) 232C power ON control [232C POWON]
Option "ENABLE" or "DISABLE" (loop enabled)
Default DISABLE
Function The item decide whether Power ON by the 232C command is enabled/disabled in the standby state.
The same function as 232C command "RSPW".
ENABLE
DISABLE
: The content of the last memory is followed.
: If [INPUT MODE START] is set to Normal, input mode is not fixed.
: When "INPUT MODESTART" is active, it is impossible to switch to another channel or input
source.
: When "INPUT MODESTART" is active the unit starts at the input mode which is selected when
power is turned on in the case of the AC-ON only.
: When "INPUT MODESTART" is active the unit starts at the input mode which is selected
when power is turned on in any case.
(AC→ON, remote control→ON, main utit's key→ON)
: The sound from the speakers is output.
: The sound from the speakers is not output even if the headphones are not used.
: This function is not active.
: This function is active, and remote control is active, too.
: This function is active, but remote control is not active.
regardless of this setting.
mode, inspection mode or Public mode setting screen.
: POWR0001 is always enabled.
: Start-up may be impossible at POWR0001.
(If the 232C command reception module is set to OFF, the command is invalid.)
5 – 12