Sharp LC-60LE740E Service Manual page 100

LC-60/70LE740E/RU,741E/S,743E,60LE840E/RU,841E/S,843E,80LE645E/RU,646E/S,648E
16) Public mode setting [PUBLIC MODE]
Option "OFF" or "ON" (loop enabled)
Default OFF
Function The item decide whether Public mode setting menu are enabled or disabled.
The same item as [PUBLIC MODE] in the adjustment process menu.
OFF
ON
Remarks Each operation of the Public mode is impossible unless this item is set to ON.
9. Copy Mode
1. Starting the Copy Mode
1) Method of needing password
a) While holding down the "INPUT" and "Volume UP" keys on the set at once, plug in the AC power cord to turn on the power.
b) Display the Pass Word input screen.
After a while, value of Enter password appears on the screen.
Enter password
Operation procedure
• The initial input position is the digit at the left end.
• For the numeric keys "0" to "9" of R/C, key input is accepted.
Input of the other keys is prohibited.
• Change "—" to " " by inputting the numeric key at the input position, and shift the input position rightward one digit.
• When three digits are completely input, the Pass Word is judged.
c) Check the Pass Word by inputting three digits.
If the Pass Word "3" "6" "9", it shifts to the Copy Mode setting screen.
In another case, the screen is erased, and it operates in the ordinary mode.
2. Exiting the Copy Mode Setting screen
There is following way to exit the Copy Mode setting screen.
• Turn off the power. (Unplug the AC power cord from the outlet to forcibly turn off the power.)
3. Basic operation in the Copy Mode
CH (+/-) or Cursor ( / )
Decision (ok)
: Public mode is not active.
: Public mode is active.
Enter password
Movement to the selected item.
Execution
5 – 56
Enter password