Cirrus DESIGN SR22 Pilot Operating Handbook page 430

Section 9
Supplements
Section 4 - Normal Procedures
Additional normal operating procedures for the System Fifty
Five X are described in the S-Tec System Fifty Five X Pilot's
Operating Handbook.
PreFlight Inspection
1. Engage Autopilot Heading Mode .......................Press HDG button
2. Engage Autopilot Altitude Hold Mode ..................Press ALT button
3. Autopilot Override ..................................................................TEST
Move flight controls fore, aft, left and right to verify that the
autopilot can be overpowered.
4. Disengage Autopilot .................................... Press AP DISC button
Verify the AP disengages.
5. Trim ................................................................ SET FOR TAKEOFF
6. Autopilot RDY Light ...................................................... CHECK ON
8 of 24
• Note •
Cirrus Design
SR22 / SR22T
P/N 13772-140
Revision 02: 09-20-12