Panel Layout; The Front Panel - TP-Link Archer C7 User Manual

1.4

Panel Layout

1.4.1

The Front Panel

The router's LEDs are located on the front panel (View from left to right).
Name
(Power)
(System)
(Wireless
2.4GHz)
(Wireless
5GHz)
(Ethernet)
(Internet)
(WPS)
(USB on
the rear panel)
Archer C7
Figure 1-1 LEDs on the front panel
Status Indication
Off Power is off.
On Power is on.
The router is initializing or maybe has a system error.
On
Flashing The router is working properly.
The router has a system error.
Off
The wireless function is disabled.
Off
The wireless function is enabled. The router is working on
Flashing
2.4GHz radio band.
The wireless function is disabled.
Off
The wireless function is enabled. The router is working on
Flashing
5GHz radio band.
There is no device linked to the corresponding port.
Off
There is a device linked to the corresponding port but there
On
is no activity.
Flashing There is an active device linked to the corresponding port.
Slow A wireless device is connecting to the network by WPS
Flashing function. This process will last in the first 2 minutes.
A wireless device has been successfully added to the
On
network by WPS function.
Quick A wireless device failed to be added to the network by WPS
Flashing function.
Off No storage device or printer is plugged into the USB port.
A storage device or printer has connected to the USB port.
On
Table 1-1 The LEDs Description
AC1750 Wireless Dual Band Gigabit Router
- 4 -