TP-Link Archer C7 User Manual page 84

To add a new rule, follow the steps below.
1. Click the Add New... button, the next screen will pop-up as shown in Figure 4-62.
2. Select a common application from the Common Applications drop-down list, then the
Trigger Port field and the Incoming Ports field will be automatically filled. If the Common
Applications do not have the application you need, enter the Trigger Port and the
Incoming Ports manually.
Select the protocol used for Trigger Port from the Trigger Protocol drop-down list, either
3.
TCP, UDP, or All.
Select the protocol used for Incoming Ports from the Incoming Protocol drop-down list,
4.
either TCP or UDP, or All.
Select Enabled in Status field.
5.
6. Click the Save button to save the new rule.
Trigger Port - The port for outgoing traffic. An outgoing connection using this port will trigger

this rule.
Trigger Protocol - The protocol used for Trigger Ports, either TCP, UDP, or All (all

protocols supported by the router).
Archer C7
Figure 4-61 Port Triggering
Figure 4-62 Add or Modify a Triggering Entry
- 72 -
AC1750 Wireless Dual Band Gigabit Router