TP-Link Archer C7 User Manual page 49

Wireless Network Name - Enter a value of up to 32 characters. The same Name (SSID)

must be assigned to all wireless devices in your network.
Region - Select your region from the drop-down list. This field specifies the region where the

wireless function of the router can be used. It may be illegal to use the wireless function of
the router in a region other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for assistance.
When you select your local region from the drop-down list, click the Save button, then the
Note Dialog appears. Click OK.

Note:

Per FCC regulations, all Wi-Fi products marketed in the U.S. must be fixed to the U.S. region
only.
Mode - This field determines the wireless mode which the router works on.

11bg mixed - Select if you are using both 802.11b and 802.11g wireless clients.

11bgn mixed - Select if you are using a mix of 802.11b, 11g, and 11n wireless clients. It

is strongly recommended that you set the Mode to 802.11bgn mixed, and all of
802.11b, 802.11g, and 802.11n wireless stations can connect to the router.
Channel Width - Select the channel width from the drop-down list

automatic, which can adjust the channel width for your clients automatically.

Note:
If 11bg mixed is selected in the Mode field, the Channel Width selecting field will turn grey
and the value will become 20M, which is unable to be changed.
Archer C7 AC1750 Wireless Dual Band Gigabit Router
Note Dialog
- 37 -
The default setting is
.