Setting / Recording: Recording On 4Ch Mode - Zoom H4n Operation Manual

1-05

Setting / Recording: Recording on 4CH mode

This is the method to record 4 channel stereo sounds coming from the built-in mic and the external
input jack.
[RECORDING DIRECTION]
Change to 4CH mode
* Change the FILE setting.
• REC FORMAT
* Use the recording functions: •
AUTO REC/STOP
• PRE REC
• REC LEVEL AUTO
* Use the METRONOME
1. Recording standby.
2. Select the input source.
3. Adjust the recording level of
the source.
Recording operation.
4. Start recording
• temporary stop
• record again
• put a mark on a file.
5. Recording completes.
*You can record skipping this step.
053
Press the [MENU] button for
more than 2 seconds, and start
operation from the top screen.
STEREO
MODE TOP
1
[RECORDING STANDBY]
press.
light blinks
blinks
2
[Adjust the recording level]
light on
Select the input sources and
press.
* When you use the built-in microphones:
select [MIC]
Connection from outside:
INPUT [1] and [2]
3
Adjust the recording level
of the input sources.
4
[START RECORDING]
press.
or
a new file
name here
light on
5
[COMPLETE RECORDING]
press.
light off
The number
figures rotate.
Counter
returns back
to 0.