SERVICE AND ADJUSTMENTS
WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SER VICE OR AD JUST MENTS:
•
Depress brake pedal fully and set parking brake.
•
Place attachment clutch in "DISENGAGED" position.
•
Turn ignition key to "STOP" and remove key.
•
Make sure the blades and all moving parts have completely stopped.
•
Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.
TO REMOVE CENTER CHUTE (See Fig. 41)
1
2
H
I
Fig. 41
J
D
TO REMOVE MOWER (See Fig. 42)
Mower will be eas i er to re move from the right side of trac tor.
•
Remove center chute as described previously.
•
Place attachment clutch in "DISENGAGED" position.
•
Lower attachment lift lever to its lowest position.
•
Remove cable (H) by depressing tabs (I) and removing
cable end from bracket (J).
•
Remove mandrel cover (Q)
•
Remove mower belt from clutch pulley (M).
•
Dismantle the retainer spring (E) and remove the lever.
•
Dismantle the retainer spring (A) and remove the lever.
•
Dismantle the retainer spring (D) and remove the lever.
IMPORTANT: IF AN ATTACHMENT OTHER THAN THE
MOWER DECK IS TO BE MOUNTED ON THE TRACTOR,
REMOVE THE FRONT LINKS.
•
Slide mower out from under right side of tractor.
CAUTION: Attachment lift lever is spring
loaded. Have a tight grip on rod and re-
lease slowly.
TO INSTALL MOWER
•
Push in the mower deck under the tractor.
•
Assemble in the reverse order to dismantling.
M
A
E
Fig. 42
24
Q