Husqvarna TC 342 Operator's Manual page 12

KNOW YOUR TRACTOR
READ THIS MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR
Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments.
Save this manual for future reference.
B
A
M
Our tractors conform to the applicable safety standards of the American National Standards Institute.
(A) ATTACHMENT LIFT LEVER - Used to raise, lower,
and adjust the mower deck or other attachments mounted
to your tractor.
(B) CLUTCH/BRAKE PEDAL - Used for declutching and
brak ing the tractor and starting the engine.
(C) PARKING BRAKE LEVER - Locks brake pedal into
the brake position.
(D) THROTTLE CONTROL - Used to control engine speed.
(E) ATTACHMENT CLUTCH SWITCH - Used to en gage the
mower blades or other attachments mounted to your trac tor.
(F) IGNITION SWITCH - Used for starting and stopping
the engine.
(G) ROS "ON" POSITION - Allows operation of mower
deck or other powered attachment while in reverse.
(H) LIGHT SWITCH - Turns the headlights on and off.
OPERATION
H
P
D
N
C
Z
J
V
Fig. 19
(J) CRUISE CONTROL LEVER - Used to set forward
move ment of tractor at desired speed without holding the
forward drive pedal.
(K) FORWARD DRIVE PEDAL - Used for forward move-
ment of tractor.
(L) REVERSE DRIVE PEDAL- Used for reverse move-
ment of tractor.
(M) FREEWHEEL CONTROL - Disengages transmission
for pushing or slowly tow ing the trac tor with the engine off.
(N) CHOKE CONTROL - Used when starting a cold engine.
(P) HOURMETER - Indicates hours of operation.
(V) EZ MULCH LEVER - Used to engage and disengage
the mulching function.
(Z) AMMETER - Indicates charging (+) or discharging (-)
of battery.
12
E
F
K
L
G