Table of Contents
Advertisement
Other Issues
Symptom
There is an abnormal
sound.
There is a buzzing
sound.
It takes a while to start
printing.
A print job has stopped
in the middle of the
printing process.
The specified settings
such as the time setting
have been erased.
Memory is insufficient.
It takes a long time to
finish printing.
The printer driver is not
correctly displayed on
Mac OS X.
The machine turns off
automatically.
Point to check
The machine is inclined.
There is a piece of paper or
unknown object inside the
machine.
The top cover is open.
The machine is printing on heavy
or thin paper when the
temperature inside is high.
The machine is warming up from
the power save or sleep mode.
The machine may be cleaning the
image drum.
The machine is adjusting the
temperature of the fuser unit.
The machine is processing data
from another interface.
As a result of processing print jobs
continuously, the fuser unit has
become hot. The fuser unit is
cooling off.
As a result of processing print jobs
continuously for a long time, the
temperature in the machine inside
has become too high. The machine
is cooling off.
The machine was turned off for a
long time or every day.
You have launched Multiple
applications.
The processing speed of the
computer may be slowing down
the print job.
You have selected [High Quality
(Multiple tones)] on the [Print
Job Options] tab of the printer
driver.
The print data is complicated.
The printer driver may not be
operating correctly.
When your machine is not used for
a certain period of time (factory
default is 4 hours), the power turns
off automatically. This function is
called Auto Power Off.
Place the machine on a flat
surface.
Check the inside of the machine
and remove any objects.
Close the top cover.
This is not a malfunction. You can
proceed with the operation.
Press the <SETTING> key and
select [Admin Setup] > [User
Install] > [Power Save Enable]/
[Sleep] and disable both modes.
Wait for a while.
Wait for a while.
Wait until the process finishes.
Wait for a while.
When the fuser unit gets cooler,
printing restarts automatically.
Wait for a while.
When the machine gets cooler,
printing restarts automatically.
The life of the battery may have
ended. Contact your dealer.
Close the applications you are not
using.
Use a computer with faster
processing speed.
Select [Fine / Detail
(600x1200)] or [Normal
(600x600)] on the [Job
Options] tab of the printer driver.
Make the data simpler.
Uninstall the printer driver and
install it again.
Press the <SETTING> key and
select [Admin Setup] > [User
Install] > [Power Save] > [Auto
Power Off] and disable the
function.
- 162 -
Remedy
Reference
-
-
-
-
P.24
-
-
-
-
-
-
-
-
-
-
Advanced
P.23
Advertisement
Table of Contents
