Power Source - Sanyo VCB-3372 Instruction Manual

MOUNTING THE LENS
Compatible auto-iris lenses
1/3 inch Sanyo DC type lens
VCL-CS8LY: Standard angle, f= 8 mm
VCL-CS4LY: Wide angle, f= 4 mm
VCL-CS2LY: Ultra-wide angle, f= 2.8 mm
If using a VIDEO type auto-iris lens
• Set the ALC and LEVEL controls on the lens to adjust the iris. Normally the ALC volume
should be turned all the way to Av (Average).
• Depending on the type of lens used, the lens may not perform properly. In such a case,
adjust the LEVEL volume on the lens casing to correct.

POWER SOURCE

(VCB-3372P)
(VCB-3374P)
English
Connect DC connecting cord from the AC adaptor to the
12V DC IN terminal on the camera.
Then, plug the AC adaptor into an AC outlet.
WARNING:
• This AC adaptor is specially conceived for this camera.
Never use another type of AC adaptor with this
camera, and do not use this AC adaptor to power
other types of cameras.
• Not for use with toys.
• Never try to disassemble or modify the AC adaptor.
Use a commercially available 24 V AC adaptor
Connect an AC 24 V power source to the 24 V AC
connectors on the back of the camera.
Then, plug the AC adaptor into an AC outlet.
Note:
Make sure to use a cable with an earth line (22 AWG or
more) to connect to the earth connector.
7
1/2 or 2/3 inch VIDEO type lens
Standard angle, f= 9 mm
Telephoto angle, f= 12 mm
More telephoto angle, f= 16 mm
.