Power Source - Sanyo VCB-7312P Instruction Manual

9
a
ON
OFF
BLC

POWER SOURCE

9
Camera setup section (under the cover)
This unit factory settings are as indicated below. However, if
due to installation conditions or environment the settings
may need to be modified for best results (see "SETTINGS").
To access the controls, remove the cover fixing screw, then
remove the cover.
b
a
Backlight compensation
VR401
L
E
V
switch (BLC)
E
L
L H
DC
b
Lens iris level volume
VIDEO
A. I.
LENS
(LEVEL)
Connect DC connecting cord from the AC adaptor to the
12V DC IN terminal on the camera.
Then, plug the AC adaptor into an AC outlet.
WARNING:
• This AC adaptor is specially conceived for this camera.
Never use another type of AC adaptor with this
camera, and do not use this AC adaptor to power
other types of cameras.
• Not for use with toys.
• Never try to disassemble or modify the AC adaptor.
Control name Position
OFF
about centre
4
English