Wired Network Setup - Samsung Xpress C43 series User Manual

Wired network setup

3
Printing a network configuration report
You can print Network Configuration Report from the machine's control panel
that will show the current machine's network settings. This will help you to set
up a network.
Press the (Cancel or Stop/Clear) button for two seconds on the control
panel.
Using this Network Configuration Report, you can find your machine's MAC
address and IP address.
For example:
• MAC Address: 00:15:99:41:A2:78
• IP Address: 169.254.192.192
4
Setting IP address
• If your device does not support a network connection, it will not be able
to use this feature (see
• TCP/IPv6 is not supported by this program.
"Rear view" on page 19).
First, you have to set up an IP address for network printing and managements.
In most cases a new IP address will be automatically assigned by a DHCP
(Dynamic Host Configuration Protocol) server located on the network.
IPv4 configuration using SetIP (Windows)
Before using the SetIP program, disable the computer firewall from Control
Panel > Security Center > Windows Firewall.
The following instructions may differ for your model.
1 Download the software from the Samsung website then unpack and
install it: (http://www.samsung.com > find your product > Support or
Downloads).
2 Follow the instructions in the installation window.
3 Connect your machine to the network with a network cable.
4 Turn on the machine.
5 From the Windows Start menu, select All Programs > Samsung
Printers > SetIP > SetIP.
Click the icon (third from left) in the SetIP window to open the TCP/
6
IP configuration window.
2. Using a Network-Connected Machine
96