(2) ZIF connector on the system board (see
(3) TouchScreen cable ZIF connectors on the system board (2 connectors)
(4) Speaker cable (see
(5) Antenna cable from terminal on the system board
(6) Power/volume button board cable ZIF connector on the system board (see
board on page
2.
Remove the five screws (1) that secure the system board to the display panel assembly.
3.
Remove the system board (2).
30
Chapter 5 Removal and replacement procedures
Speakers on page
32)
TouchPad board on page
26)
28)
Power/volume button