Panasonic CF-M34 Series Toughbook Reference Manual page 50

Dealing with Problems
Character Input
Only capital letters are
being input
How to input European
characters (ß, à, ç), sym-
bols or Euro Currency
Symbol is unclear
Setup Utility
[Enter Password] is dis-
played
[Advanced] menu can
not be registered
All or some items in [Se-
curity] menu can not be
registered
F9 does not work
Others
Computer hangs
Network
Unable to connect to a
network
Windows 2000
When performing a copy
operation via a LAN card
with a computer on the
network, an error mes-
sage is displayed and the
copy operation fails
If CapsLock is on, the Caps Lock function is ON. To switch it OFF , press
Caps Lock .
Windows 2000
Select [Start] - [Programs] - [Accessories] - [System Tools] - [Character Map].
Windows XP
Select [Start] - [All Programs] - [Accessories] - [System Tools] - [Character Map].
The Character Map will be displayed. Point to the desired font name and select it.
Enter the User Password or Supervisor Password. If you have forgotten it, contact
Panasonic Technical Support.
Restart the Setup Utility with the Supervisor Password.
Restart the Setup Utility with the Supervisor Password.
Restart the Setup Utility with the Supervisor Password.
Press Ctrl + Alt + Del to open Task Manager and close the software
application which is not responding.
After cutting the power by sliding the power switch for more than four seconds,
slide the power switch to power on and open the application again.
If the program no longer works normally, go to [Start] - [Settings] - [Control Panel]
- [Add/Remove Programs] to delete the program. Then reinstall the program.
Windows 2000 : [Control Panel] - [Add/Remove Programs]
Windows XP : [Control Panel] - [Add or Remove Programs]
Windows XP
When switching to a different user with the Fast User Switching function, some
applications may not work properly. In this case, log off then log on with adminis-
trator authority again and try the operation once more.
When using the computer as a network computer, some additional settings may
have to be made depending on the usage conditions. We recommend asking your
system administrator or the person in charge of the network.
If the standby or hibernation mode is entered, the computer may have to be re-
started.
The settings for the LAN card you are using may not be optimized. Confirm this
with the following procedure.
1 Double-click the Network Card you are using from [Network adapters] in [Con-
trol Panel] - [System] - [Hardware] - [Device Manager]
2 Select [Advanced], select [Store And Forward] from [Property], then set [En-
abled] for [Value] if it is set to [Disabled]
(This item may be unavailable for some types of network cards.)
Confirm that the computer on the network is operating properly and that the file is
not corrupt.
(Advanced)
50