Panasonic CF-M34 Series Toughbook Reference Manual page 13

Standby/Hibernation Functions
Shutting Down Using the Standby or Hibernation Function
The computer should be set for standby or hibernation function. (
* When the speaker function is disabled, e.g., by the key combination
be no beep sound.
CAUTION
At the "beep" sound, release your finger from the power switch. If you continue to
slide the switch and hold it for more than four seconds, the unit will emit a second
"beep" then power off. Data not previously saved will be lost.
Windows 2000
Even when [When I press the power button on my computer] is set to [Power Off]
with [Control Panel] - [Power Options] - [Advanced], if the power switch is pressed,
a beep will sound and the power will go off if the switch is pressed for more than four
seconds, although the computer will not completely shut down.
Windows XP
Even when [When I press the power button on my computer] is set to [Shut down]
with [Control Panel] - [Performance and Maintenance] - [Power Options] - [Advanced],
if the power switch is pressed, a beep will sound and the power will go off if the
switch is pressed for more than four seconds, although the computer will not com-
pletely shut down.
NOTE
With the method below, you can shut down the computer by using the standby
function.
• Fn + F7 (
• Windows 2000
In [Start] - [Shut Down], select [Stand by].
Windows XP
In [Start] - [Turn Off Computer], select [Stand By].
With the method below, you can shut down the computer by using the hiberna-
tion function.
• Fn + F10 (
• Windows 2000
In [Start] - [Shut Down], select [Hibernate].
Windows XP
In [Start] - [Turn Off Computer], press and hold Shift , then select [Hibernate].
Slide the power switch; at the "beep*" sound,
release your finger.
(After releasing your finger from the
power switch, do not touch the power
switch until the power indicator goes
off or blinks.)
page 2)
page 2)
13
page 12)
Standby Mode
or
Hibernation Mode
Fn + F4 , there will