Toshiba e-STUDIO203S Service Manual page 60

23) Remove two screws and remove the fusing connector.
24) Remove five screws and the connector, and lift the intermediate
frame unit to remove.
3)
3)
1)
25) Remove four screws, and remove the lower paper guide unit.
[Note for installation]
Fit the lower paper guide hole (a) with the shifter gear hole (b)
so that the black resin (c) of the shifter unit can be checked.
1)
3)
3)
4)
2)
2)
b
c
a
1)
1)
1)
2)
e-STUDIO203S/203SD DISASSEMBLY AND ASSEMBLY 8 - 14
26) Disengage the pawl, and remove the pulley.
27) Shift and remove the shifter unit.
2)
3)
1)
28) Remove the screw, and remove the grounding plate and the
gear.
29) Remove the E-ring, the gear, and the bearing, and remove the
shifter roller.
30) Put the lower paper guide unit upside down, remove two
screws, and remove the shifter motor.
1)
2)
3)
4)
1)
2)
3)