Dip Switch Functions - EverFocus EHD525EX User's Manual And Operation Instructions

Hide thumbs Also See for EHD525EX:

LL (Line-Lock) OFF/ON

Set the line-lock off the camera will synchronize to the internal time base.

Set the line-lock on, the camera's vertical synchronization can be driven by

the AC signal in the power lines.

Note: Line-Lock sync mode operation is possible only when used with

an AC power source; it's not possible with a DC power source.

The default setting is ON.

AGC (Automatic Gain Control) OFF/ON

AGC ON: Signal strength sensitivity automatically adjusts to the high or

low light conditions. The default setting is ON.

AGC OFF: This setting should be turned switched to in an environment

with a constant light source.

Dip Switch Functions

Vari-Focal Lens

Table of Contents