Remote Control Instructions - Dimplex BF5000NT Parts & Service Manual

BF5000NT, BF5000, EF2604, SF2603, DF2603

REMOTE CONTROL INSTRUCTIONS

(Optional Accessory)
1. Plug firebox into the outlet located on the side of the receiver.
2. Plug receiver into the wall outlet.
3. Install a 9 volt battery into the transmitter.
4. Turn the firebox main power switch to the on position prior to using the remote
control.
5. Push the ON button to turn the firebox on. Push the OFF button to turn the firebox
OFF.
NOTE
To prevent the risk of fire, the stove plug must be inserted fully into the receiver
NOTE
For indoor use in dry areas only
NOTE
For use on electrical devices with 15 amp resistive load or 1/3 HP inductive load
120 VOLT AC only
NOTE
The remote control and receiver has a range of approxiamately 50ft. (15.25m) it does
not have to be pointed at the fireplace and can pass through most obstacles (including
walls). The remote control and receiver use one of 243 independent frequencies.
When replacing the remote control or the receiver they must be replaced as a set to
ensure proper operation. The frequency of the remote is located on the back of the
remote on a label.
NOTE
ON/OFF Remote Control may be used to control most other electrical devices including
T.V.'s, stereos and lamps.
RECEIVER
2
TRANSMITTER