Meridian Power Amplifier G Series Installation Manual page 24

2 0
I n s t a l l i n g
t h e p o w e r
a m p l i f i e r
To connect to passive loudspeakers
• Set the BRIDGE MODE switch to the OFF position.
To bi-wire to passive loudspeakers
• Set the BRIDGE MODE switch to the OFF position.
Important: Remove the links bridging the LF and HF terminals on
the back of each loudspeaker.
Loudspeaker
Treble
Bass/mid
Loudspeaker
Treble
Bass/mid
G56/G57
OFF
• Connect one of each pair of the red and black terminals from
the appropriate channel of the G56/G57 to the red and black
terminals on the loudspeakers.
G56/G57
OFF
• Connect the LF red and black terminals from each loudspeaker
to the red and black terminals on the appropriate channel of the
G56/G57, using twin loudspeaker cable.
• Connect the HF red and black terminals from each loudspeaker
to the other pair of red and black terminals on the appropriate
channel of the G56/G57.
Loudspeaker
Treble
Bass/mid
Loudspeaker
Treble
Bass/mid