Meridian Power Amplifier G Series Installation Manual page 11

To connect the G55 to an unbalanced preamplifier (eg G01 Control Unit)
• Switch the BRIDGE MODE switch for channels 1/2 to the OFF
position.
• Connect the UNBALANCED sockets on the power amplifier to the
outputs from the preamplifier.
To connect the G55 to a balanced preamplifier (eg G02 Balanced Control Unit)
G02 Balanced Control Unit
• Switch the BRIDGE MODE switch for channels 1/2 to the OFF
position.
• Connect the BALANCED sockets on the power amplifier to the
balanced outputs from the preamplifier, using XLR cables.
• Switch the corresponding channels to the BALANCED position.
G01 Control Unit
PRE OUT
AUDIO LEAD
AUDIO LEAD
• Switch the corresponding channels to the UNBALANCED position.
You should either use a twin-screened audio cable, or a pair of
single-screened audio cables.
BALANCED
MAIN OUT
XLR LEAD
G55 Five-channel Power Amplifier
OFF
G55 Five-channel Power Amplifier
OFF
XLR LEAD
OFF
OFF
7
I n s t a l l i n g
t h e p o w e r
a m p l i f i e r